Vibro V1.10

• Summary: Change the vibration pattern for incoming calls SMS and E-Mail.

Use this tool at your own risk !!!

Feature:
- Two separate Programms.One EXE for Configuration (VibroCFG) and one EXE for notification (Vibro).
- Multilanguage
- separately config Phone, SMS and EMail
- Vibration pattern set for Phone, SMS and EMail separately
- SMS and EMail vibration set in lengths in different
- Alternate SMS interception
- In what will be Profiel Vibrates
- Choose a Vibrator
- Cab-File that install the Programm

How To...
- Install the CAB on the Device
- Run VIBROCFG.EXE
- Setup Pattern -> Vibrate,Break,Vibrate,Break in ms
- Setup Profile -> In what is to be vibrated Profile (You can see the active Profile in your Phone, under the Profilesettings)
- Setup Vibrator-Nr -> Which vibrator works vibrate. Mostly the highest number.
- Configure SMS,EMail
- Press Exit in the Menu and the Programm Save the INI and Start the VIBRO.EXE
- When you reset you device. Vibro.Exe is in the Startup, so it runs automticly.(After you have Phoneservice)

FAQ
- Pattern repeat x 1 -> The pattern that you have entered is repeated X times (e.g.:200,200,100,100 -> 200,200,100,100,200,200,100,100,200,200,100,100 ).
- You must check the Profile, you want to vibrate the pattern.
- When you receive a SMS in Vibration-Mode, it will set the Profile for a 5 Second to Silent-Mode.I can not otherwise prevent the vibrating standart.

Developer: earthjumper